2 Sachs Rear Shock Absorbers for Smart Cabriolet City-Coupe Fortwo Roadster

  
2 Sachs Rear Shock Absorbers for Smart Cabriolet City-Coupe Fortwo Roadster. This product sheet has been automatically translated. If you have any questions, please feel free to contact us. 2 Sachs rear shock absorbers for Smart Cabrio City-Coupé Fortwo Roadster.

Delivery contents: 2 rear Sachs shock absorbers. See technical information and vehicle table. Shock absorber mounting type: upper eye Shock absorber mounting type: lower eye Shock absorber type: gas pressure Shock absorber system: twin-tube. SACHS shock absorbers stand for the highest quality.

Many renowned car manufacturers equip their new cars with SACHS car shock absorbers as standard. Every year, more than 10 million new cars equipped with SACHS products roll off the assembly lines. SACHS shock absorbers for the aftermarket are always at the forefront of technology and provide modern safety and comfort. They offer performance and dynamics for the chassis, perfect traction, and turns.

Please check the compatibility of items BEFORE paying for an order. Once an order has been paid for, it is automatically shipped so that the goods reach you as quickly as possible. If you are unsure, send us your vehicle data BEFORE paying so that we can check your order and correct it if necessary. To check your order, we need the KBA number from your registration certificate, the chassis number (E number), and the date of first registration. In some cases, additional information is required to reliably identify the required spare part.

Saving on consumables such as paper and ink/toner saves valuable environmental resources. Additionally, you no longer have to worry about storing, sorting, and searching for your invoice.

Please note that it is NOT possible to change the delivery address after payment, as we release and pass on orders directly for shipping. Information on the disposal of used oils from Renet Autoteile Netzwerk GmbH. Used oils are liquids that are both flammable and polluting to water. Oils must be deposited at a used oil collection point after use! Improper disposal of used oils endangers the environment!

Any addition of foreign substances such as solvents, brake fluids, and coolants is prohibited. Our mentioned used oil collection point accepts engine or gear oils free of charge within the limit of the quantity of engine or gear oils handed in on a case-by-case basis.

Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F. Kennedystrasse 7 55743 Idar-Oberstein Used oils can also be returned to petrol stations or recycling collection points (e.

, recycling center; possibly) in principle. You can usually find out whether your local recycling collection point accepts used oils on-site or from the competent municipal information office. If necessary, we will provide you with a place to dispose of your used oil. The following information is for those who use batteries and no longer resell them in the form in which they were supplied (end users): 1. Free return of used batteries. Batteries must not be disposed of with household waste. You are legally obliged to return used batteries.

As a battery distributor, we are obliged to take back used batteries (excluding products with installed used batteries), our take-back obligation being limited to used batteries of the type that we have or have used as new batteries in our range and the quantity that end-users usually dispose of. You can either return the old batteries to us with sufficient postage or return them free of charge directly to our shipping warehouse at the following address: Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F. Kennedystrasse 7 55743 Idar-Oberstein 2. Batteries are marked with a crossed-out trash can symbol (see below). Contaminated batteries are specially marked with chemical symbols.

For batteries that contain more than 0.0005 percent by mass of mercury, more than 0.002 percent by mass of cadmium, or more than 0.004 percent by mass of lead, the chemical name of the pollutant used is located under the trash can symbol - where "Cd" means cadmium, "Pb" means lead, and "Hg" means mercury. You have the option to review this information in the accompanying documents or in the manufacturer's instructions for use.

0.6 (S1OLA1, 450.441, 450.442, 450.443). 03.00 - 01.04. Rear axle installation location for vehicles with standard chassis. 0.6 (S1OLD2, 450 452).

01.01 - 01.04. 06.02 - 01.04. 0.6 (S1CLB1, 450.331, 450.336).

07.98 - 01.04. 0.6 (S1CLA1, 450.341). 0.8 CDI S1CLC1, 450.300, 450.301, 450.302, 450.303...

11.99 - 01.04. 0.6 (450 352, 450 353). 0.6 (450 330, 450 332). 06.02 - 12.03.

01.04 - 01.07. 0.8 CDI (450.401, 450.402, 450.403, 450.400). 0.7 (450 352, 450 332). 0.8 CDI (450300, 450301, 450302, 450303, 450306).

04.03 - 11.05. Thank you for your interest in our products, your team of cheap car parts.