Delivery contents: 1 SKF rear wheel bearing. See technical information and vehicle table. Rim: 3 Ø flange: 134.
Original SKF wheel bearing kit. There is no alternative to quality - Quality of original spare parts - Manufactured according to the requirements and specifications of the automobile manufacturer - The quality of these spare parts is equal to or higher than that of the products that the automobile manufacturer sells under its brand - including mounting accessories such as locking rings, screws, nuts, or similar. Wheel bearing units SKF wheel bearing units generally consist of a bearing, a seal, a lubricant, and a shaft locking mechanism. The units are preassembled and factory set. Wheel bearing housing To protect the high performance properties of SKF bearings, SKF designs and manufactures a complete range of bearing housings and housing seals. These housings and seals are known for their quality and durability. SKF bearings are characterized not only by their special design features that facilitate assembly, alignment, and re-lubrication, but they are also machined with precision so that the bearing can achieve its full service life. Please check the compatibility of items BEFORE placing an order. Once an order has been paid, it is automatically shipped so that the goods reach you as quickly as possible.If you are unsure, send us the data of your vehicle BEFORE paying so that we can check your order and correct it if necessary. To check your order, we need the KBA number.
From your registration certificate, the chassis number (E number), and the date of first registration. In some cases, additional information is required to reliably identify the required spare part.
Saving on consumables such as paper and ink/toner helps save valuable environmental resources. In addition, you no longer have to worry about storing, filing, and searching for your invoice. Please note that it is NOT possible to change the delivery address after payment, as we release and forward orders directly for shipment. Information on the disposal of used oils from Renet Autoteile Netzwerk GmbH.
Used oils are both flammable and polluting to water liquids. Oils must be deposited at a used oil collection point after use! Improper disposal of used oils endangers the environment!
Any addition of foreign substances such as solvents, brake fluids, and coolants is prohibited. Our mentioned used oil collection point accepts used engine or gear oils free of charge up to the amount of engine or gear oils handed in on a case-by-case basis.
Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F. Kennedystrasse 7 55743 Idar-Oberstein In principle, used oils can also be returned to gas stations or recycling collection points (e., recycling center; possibly) for a fee. You can usually find out if your local recycling collection point accepts used oils on-site or from the competent municipal information office. If necessary, we will also provide you with a place to dispose of your used oil.The following information is for those who use batteries and no longer resell them in the form in which they were provided (end users): 1. Free return of used batteries Batteries must not be disposed of with household waste. You are legally obliged to return used batteries. As a battery distributor, we are obliged to take back used batteries (except for products with used batteries installed), with our take-back obligation limited to used batteries of the type that we have or have used as new batteries in our range and the quantity that end users typically dispose of.
You can therefore either return the old batteries to us with sufficient postage or hand them over free of charge directly to our shipping warehouse at the following address: Pro ReNet GmbH c/o Jakobs Wütschner GmbH John F. Kennedystrasse 7 55743 Idar-Oberstein 2. Meaning of battery symbols Batteries bear the symbol of a crossed-out trash can (see below). Contaminated batteries are specially marked with chemical symbols. For batteries that contain more than 0.0005 percent by mass of mercury, more than 0.002 percent by mass of cadmium, or more than 0.004 percent by mass of lead, the chemical name of the pollutant used is found under the trash can symbol - where "Cd" means cadmium, "Pb" means lead, and "Hg" means mercury. You have the option to reread this information in the accompanying shipment documents or in the manufacturer's instructions for use.0.6 (S1OLA1, 450.441, 450.442, 450.443). 03.00 - 01.04.
0.8 CDI (S1OLC1, 450.401, 450.402, 450.403, 450.400). 03.01 - 01.04. 0.6 (S1OLD2, 450 452).
01.01 - 01.04. 0.7 (450 452, 450 432).
01.03 - 01.04. 06.02 - 01.04.0.6 (S1CLB1, 450.331, 450.336). 07.98 - 01.04. 0.6 (S1CLA1, 450.341).
0.8 CDI S1CLC1, 450.300, 450.301, 450.302, 450.303... 11.99 - 01.04.0.6 (450 352, 450 353). 0.7 (450 352, 450 353).
0.6 (450 330, 450 332). 06.02 - 12.03. 01.04 - 01.07.
0.8 CDI (450.401, 450.402, 450.403, 450.400). 0.7 (450 352, 450 332). 0.8 CDI (450300, 450301, 450302, 450303, 450306). 04.03 - 11.05. 0.7 Brabus (452.437). 12.03 - 11.05. 0.7 Brabus (452.337). 06.03 - 11.05. Thank you for your interest in our products, your team of affordable automotive parts.