Turbo for Smart Cabriolet City-Coupe Crossblade 450 0.6L 1998-2004 GT1238S

  

This product sheet has been automatically translated. If you have any questions, please do not hesitate to contact us. Heating regulator by servo motor.

The quality of our items is very strictly controlled. Large selection of car parts in our shop. Note: only for SMART engine code: M 160 E6AL B05/M 160.910. Attention: Important information regarding the installation of a turbocharger. To avoid installation errors, APM recommends that the goods be installed only by a specialized workshop. Make sure that the cause of malfunction and damage caused to the old turbocharger has been eliminated. Before starting the installation, the following parts around the turbocharger must be checked for dirt and leaks. Outlet and feed lines on the turbocharger. Possibly a soot particle filter.

The engine oil, oil filter, and air filter must be replaced when changing the turbocharger. The turbocharger must be completely filled with clean engine oil before attaching the oil feed line through the oil inlet hole. Oil lines leading to the turbocharger as well as all flange and connection seals must also be replaced. For some brands, the intercooler must also be replaced according to the installation instructions. Liquid sealants should never be used.

After commissioning, check the tightness of all air, gas, and fuel lines. The air intake and exhaust system as well as the intercooler must be cleaned. Ensure that the system is free of chips, dirt, corrosion, oil, and other foreign bodies or substances. After installing the turbocharger, the engine must be restarted. Then let the engine idle for 30 seconds before loading it.

Please note that warranty and/or liability claims against APM Autoteile GmbH cannot be considered if the turbochargers are installed without following the above installation instructions and this alone causes damage. Logistics fees apply for cross-border shipments (delivery address outside of Germany). Please note the actual logistics costs incurred.

La Palma, La Gomera, El Hierro, Tenerife, Gran Canaria, Fuerteventura, Lanzarote. Martinique, New Caledonia, Guyana, Saint Pierre and Miquelon, Mayotte, Wallis and Futuna, La Réunion.

& The engine oil, oil filter, and air filter must be replaced when changing the turbocharger. & Oil lines leading to the turbocharger as well as all flange and connection seals must also be replaced. Please note that warranty and/or liability claims against APM Autoteile GmbH cannot be considered if the turbochargers are installed. Exhaust turbocharger, turbocharger set, turbocharger kit, installation kit. Installation set, installation kit, installation parts, mounting kit. Manifold gasket, exhaust manifold gasket, engine supercharging, series. Exhaust system, turbine, drive wheel, compressor wheel, turbine wheel. Turbo compressor, turbo compressor, turbo, charger, exhaust turbo. Exhaust charger, turbocharger set, gasket set, seal set.

Boost, turbo, turbocharger, repair kit. Only for SMART engine code: M 160 E6AL B05/M 160.910.